Brief Introduction To The Characteristics Of Wood-Plastic Composites

Wood-plastic composite material is a kind of reversible recycling using sawdust, sawdust, bamboo chips, rice husk, rice chaff, peanut husk, cotton straw and other low-plant biomass fibers as main raw materials, which is processed by special technology and is made of a certain proportion of plastic base materials by using the principle of macromolecule interfacial chemistry and the characteristics of plastic filling and modification. It covers a wide range of products and has many morphological structures. Samples of basic materials.

At present, there are different appellations at home and abroad. They are also called plastic wood, environmental protection wood, science and technology wood, recycled wood, aggregate wood, etc. The English name is Wood-Plastic Composites, abbreviated as WPC. It has all the characteristics of wood processing.

This new material has five characteristics:

1. Raw material recycling: its biomass material is mainly used as waste, which has a wide range of sources and low value; the plastics composition requirements are not high, new, old or mixed materials can be used, which fully reflects the comprehensive utilization and effective utilization of resources.

2. Product plasticizability: Wood-plastic products are synthetic products, which can randomly adjust the process and formulation of products according to the use requirements, thus producing materials with different properties and shapes, and the utilization ratio of profiles is close to 100%.

3. Environmentally friendly use: Wood/plastic base materials and their commonly used additives are safe, environmentally friendly, non-toxic and harmless, and will not produce toxic and side effects in the production and processing process, so they do not constitute any dangerous registers for human body and the environment.

4. Cost Economization: Wood-plastic products have realized the transfer of low-cost plant materials and high value-added products, which not only has very low maintenance costs, but also has a product life several times longer than natural wood. Comprehensive comparison has obvious economic advantages.

5. Recycling and recycling: The scrap products and recycled scraps of wood-plastic materials can be recycled by 100% without affecting the performance of the products. It can really realize the recycling mode of "reduction, regeneration and resource".