Cleaning And Maintenance Of Indoor Plastic Wood Floor

1. Remove dirt and residue with soap, hot water and a hard brush. After the cork flooring is installed, the dirt and debris are cleaned in this way. 2. Gently wipe the mark printed on the side of the plastic wood floor with alcohol or acetone. 3. Use a conventional floor cleaner or detergent containing bleach (sodium hypochlorite) and detergent. 4, the floor has grease stains, immediately use the household degreaser to remove, then rinse with hot water. 5. Clean the area marked with chalk with hot soapy water and bleach. Colored chalk marks are stubborn and cannot be removed, so consider using white chalk or talcum powder on the floor. 6. Melting ice and calcium chloride or rock salt on the floor, most home furnishing stores, such as Home Depot. When the ice begins to melt, rinse it off. 7. Remove ink stains with hot soapy water and wash thoroughly. 8. Use a cleaning product containing oxalic acid or phosphate to remove dirt and rust on the floor. This will reduce the smudges and it is possible to remove them. 9. Use common rust cleaner to remove pigmentation pollution caused by weathering of the floor. 10. Mix the bleach into hot water to wash the wine and fruit stains according to the instructions on the bleach package. Gently wipe the stain and rinse with hot water.