How to moistureproof plastic wood floor

The adjustment of environmental humidity should be flexible, and the plastic wood floor is very sensitive to the environmental humidity of the gas. The plastic wood floor is very easy to grow mold and deform when the gas is excessively wet and cold. At that time when it is wet and cold, the plastic wood floor is very easy to absorb moisture and swell, resulting in deflection, deformation and other conditions. In the hot and humid air temperature, the water vapor on the surface of the plastic wood floor must be often absorbed by the wet cloth, and the dehumidification function of the air conditioner must be turned on on on time to carry out dehumidification. The natural ventilation in the room must also be carried out moderately. The relative humidity in the afternoon is at a high value, which is not suitable for opening windows for ventilation. Usually, the time when the room is dry at noon is selected for ventilation adjustment.

Pay attention to the periodicity of temperature adjustment. The climate is different in all seasons of the year. The maintenance of the plastic wood floor should be based on the change of climate, and appropriate measures should be taken. In the hot season, the plastic wood floor is very easy to rise. Therefore, the indoor space with plastic wood floor shall be cooled by central air conditioner or desk electric fan to keep it fresh. In the severe cold season, the seam of the plastic wood floor will increase after being cold. Maintenance must pay attention to the natural ventilation time is not suitable for too long.

Choosing moisture-proof material and water-proof property is the key performance index of wood plastic floor. In the long-term "steaming and baking" of floor heating, if moisture enters, the edge of the plastic wood floor will inevitably rise, resulting in the damage of the plastic wood floor. The high-quality plastic wood floor is made of compact board, which has excellent waterproof performance and moisture absorption thin and thick moisture content far lower than the national industry standard. On the other hand, the special medium wear-resistant layer, decorative design paper and balanced layer can well "close" the board, ensuring the overall waterproof characteristics of the plastic wood floor are better.

Special attention shall be paid to the laying of plastic wood floor, because the temperature difference between day and night in early spring is large, so the laying of plastic wood floor and floor tiles shall pay attention to waterproof problems. Therefore, the wood plastic wood floor before laying, it is better to go to the indoor temperature of 16 ℃ to 18 ℃ for two days. On the other hand, the best time to install the plastic wood floor is to select the air temperature in the clear sky. The best time is to install the plastic wood floor in 7 days without rain. It is not necessary to install the plastic wood floor before the road is dried.

Often Polish waxing to maintain bright, wood plastic wood floor usually maintenance key point is polishing waxing. At the time of application of each section of wood plastic floor, it is necessary to carry out multiple polishing and waxing, which will not only release the residual moisture of the project construction, but also increase the service life of the wood plastic floor. In addition, the wood floor should be polished and waxed several times a quarter to maintain the bright and moisture-proof characteristics of the wood floor surface.

Cleaning pay attention to the operation of water demand, in the ordinary maintenance of plastic wood floor, cleaning is a necessary new project. Generally, the dirt can be solved with a soft dry towel. When it comes to the dirt that must be removed by running water, it is suggested to use a towel that is wet and dried until it is impervious to water. The plastered plastic wood floor is good to immediately open the windows and doors, let the indoor ventilation, and dry the plastic wood floor. In cold and humid air temperature, it can be wiped with wet cloth for many times, and then dehumidified with air conditioner.

The activated carbon can prevent the floor from being cold and wet, and maintain the floor in a natural environment with good environmental humidity. Due to the two-way effect of activated carbon moisture and moisture supplement (double wheel dehumidification), the plastic wood floor is not easy to crack in long-term application, and it is not easy to get moldy due to excessive humidity and cold when there is moisture in the plastic wood floor; this effect is more obvious in Meiyu weather.