Notices In Installation Of Wood Plastics

For example, before the construction, the wooden-plastic Gallery frame has to draw drawings according to the design requirements of the site construction conditions, but also to ensure that the construction site concrete base level, and each column has to stand on a horizontal plane. It is very important that the error between the position of the plane foundation point and the drawing is less than 20 mm. I hope that you will not reluctantly construct for the sake of saving time.

2. The steel base with embedded parts should be used for column installation. The floor thickness of the steel base is more than 5 mm and the pipe wall is more than 1.5 mm. The column and square pipe shall be fixed with more than two self-tapping screws.

3. Steel square pipes must be pierced in the cross beams of gallery frame. Galvanized square pipes should be used for square pipes, and square pipes should be used for wood-plastic joints as far as possible. Self-tapping screw can be used to fix the square pipes at appropriate positions on the upper surface.