For Plastic Wood Composite Decking Used Outdoors, Will High Temperature Cause It To Deform?

Friends who have a certain understanding of plastic wood flooring know that it has many advantages, so plastic wood flooring has always been welcomed by people. But after all, nothing is perfect. For outdoor plastic wood panels, the discussion is more about whether the high temperature will deform it?

1. In summer, the temperature is generally very high, especially after the rain, the common wooden floor expands and contracts with heat. When the temperature is too high, the water in the wood evaporates and absorbs water after the rain, which causes the volume to shrink and deform the joints of the floor. However, there is a layer of special coating on the surface of outdoor plastic wood board, which can effectively isolate most of the ultraviolet rays and avoid deformation to a large extent.

2. Thermal expansion and contraction are common phenomena. When installing plastic wood floors, pay attention to the gaps between the floors. During installation, the appropriate installation distance and installation method should be selected according to the geographical environment at the time, and the choice of materials for the lower bunk should also be consistent with the environment.

3. Some manufacturers with inferior technology will cut corners in the production process, or the craftsmanship of their floor does not reach the level of moisture resistance, so that they cannot effectively resist ultraviolet rays. It is easy to deform after thermal expansion and contraction, so choose plastic wood When choosing materials, we must choose a strong manufacturer.

4. Under the condition of good quality and mature construction technology, plastic wood flooring will generally not be deformed at high temperature. Naturally, some external factors cannot be avoided, such as the thermal expansion and contraction of outdoor plastic wood panels caused by underground laying of pipes.     

Second, the cleaning and maintenance skills of outdoor plastic wood.

1. Plastic wood flooring is used outdoors, and fallen leaves or mud often fall on the floor. These waste materials can be washed with a high-pressure water gun. The plastic wood has high density, strong water resistance, and will not be moldy due to flooding.

 2. Plastic boards often have dirt and residues of fruits, vegetables, milk, etc. In this case, soapy water or a plastic brush can be used to remove contaminants on the plastic boards. The effect is very good. Plastic boards sometimes have traces of other colors, which can be easily processed with alcohol and acetone. Of course, bleach or floor cleaner can also be used to remove dust. If there are oil stains or other stubborn stains, don't worry, you can use ordinary kitchen cleaners and rinse them off with water after use. If the ink still exists, you can brush it with hot soapy water, and then rinse with clean water.