How To Clean The Plastic Wood Floor

1. Use soap, hot water and hard brush to remove dirt and residues. After the plastic wood floor is installed, clean the dirt and debris in this way.

2. Use alcohol or acetone to gently wipe the mark printed on the side of the plastic wood floor.

3. Use conventional floor cleaner or cleaner containing bleaching agent (sodium hypochlorite) and detergent.

4. If there is grease stain on the floor, immediately use household degreaser to remove it, and then wash it with hot water.

5. Wash the area with chalk mark with hot soapy water and bleach. Colored chalk marks are stubborn and cannot be removed, so consider using white chalk or talcum powder on the floor.

6. Melt ice and calcium chloride or rock salt on the floor, which is available in most home product maintenance stores, such as Homedepot. When the ice starts to melt, wash it off.

7. Remove ink stains with hot soapy water, and then clean thoroughly.

8. Use cleaning products containing oxalic acid or phosphoric acid to remove dirt and rust on the floor. This will reduce the stain and may also remove it.

9. Use common rust cleaner to remove pigment precipitation pollution caused by floor weathering.

10. According to the instructions on the bleach package, mix the bleach with hot water to clean wine stains and fruit stains. Wipe the stain gently and rinse with hot water.

I hope that when you encounter the above problems, I can help you clean the plastic wood floor in time