Learn How To Install Wood-plastic Flooring

Installation method of wood-plastic floor

Installation method of wood-plastic floor 1. Preparing for construction of wood-plastic floor, ensure that the concrete base floor of construction site is level before construction. This is very important, I hope you do not reluctantly construct in order to save time, otherwise you will lose money.

Installation method of wood-plastic floor 2. The center distance of keel should be controlled between 310-410 mm. The butt joint of keel end should be left about 10 mm to facilitate drainage. At the same time, the end joint between keel row and keel row should be staggered, not in a straight line. The allowable error of keel spacing is less than 10 mm, the flatness is less than 3 mm, and the expansion joint between keel spacing and wall is 8-10 mm.

Installation method of wood-plastic floor 3. When the construction condition of base floor is poor and the structure of the main topic is not stable, steel keel should be used instead of wood-plastic keel. Galvanized steel should be used just now, and rust-proof treatment of welding slag back seat should be removed at the part of welding link.

Installation method of wood-plastic floor 4. The size of splicing gap should be reasonably determined according to the temperature and humidity of the environment, the length of the floor, the moisture content of the floor and the specific conditions of the paving area when the wood-plastic floor is installed.