Maintenance Of Indoor Wood-plastic Floor

1. Use soap, hot water and a hard brush to remove dirt and residues. After the plastic-wood floor is installed, the dirt and debris are cleaned up in this way.

2. Use alcohol or acetone to gently wipe the mark on the side of the plastic wood floor.

3. Use conventional floor cleaners or detergents containing bleaching agents (sodium hypochlorite) and detergents.

4. If there is grease stain on the floor, remove it immediately with household degreasing agent, and then rinse it with hot water.

5. Clean the chalk mark area with hot soap water and bleach. Coloured chalk markers are stubborn and cannot be removed, so consider using white chalk or talcum powder on the floor.

6. Melt ice and calcium chloride or salt on the floor. Most home maintenance stores have such products as Home Depot. When the ice begins to melt, rinse it out.

7. Use hot soapy water to remove ink stains, and then thoroughly clean.

8. Use cleaning products containing oxalic acid or phosphoric acid to remove dirt and rust on the floor. This will reduce the stain, and it is possible to remove it.

9. Use common rust detergents to remove pigmentation pollution caused by floor weathering.

10. According to the instructions of bleaching agent package, mix bleaching agent into hot water to clean wine stains and fruit stains. Gently wipe the stains and rinse them with hot water.