Seven Points For Attention In Installation Of Plastic Wood Flooring

The first aspect refers to the installation of Plastic-wood flooring in the case of bend pavement, then the construction personnel need to according to the length of the bend and the relevant angle, and then for each piece of Plastic-wood flooring at both ends of the cutting respectively, after the cutting is complete, the relevant paving steps are carried out. The second aspect is the edge-sealing treatment of Plastic-wood floor. Generally speaking, the edge-sealing is done by using specific Plastic-wood board. The height of specific Plastic-wood board can be determined according to the keel height of the floor. Of course, the edge-sealing material can also choose other metals for edge-sealing.

The third point of attention refers to the installation of plastic wood flooring due to the high density of the plastic wood material itself, so the need to use the location of self-tapping screw need to use the drill lead hole, and then the self-tapping screw tightening, in order to ensure the firmness of the installation. The fourth aspect refers to the keel of the plastic-wood floor. When the plastic-wood floor is installed, the working face is required to be flat without pits. The spacing of the keel is generally between 300 mm and 350 mm.

In addition to the four precautions mentioned above, when installing Plastic-wood floor, attention should also be paid to the pavement of large area Plastic-wood floor and the pavement of step Plastic-wood floor. The pavement of large area floor should be carried out according to the sketch map, and the floor pavement of step should be protected by metal strips if it is in the corner of the balcony. The last aspect is that in the installation process, plastic wood flooring needs to avoid heavy impact or collision.