What Are The Problems Existing In The Application Of Inferior Wood Plastic

Problems in the application of inferior wood-plastic products:

1. Fast fading will occur if the production process fails to pass through:

For plastic wood with quality defects, after a period of trial use, although there is no obvious damage, but fading has become the biggest drawback. The original construction materials are similar to mahogany wood-plastic materials, only a short period of more than two months, may become light pink, but also continue to metamorphose. If this goes on, it is very likely that it will eventually turn into light white or other colors, and a beautiful landscape will gradually evolve into an embarrassing engineering problem. It's worth it.

2. Easy damage:

Some plastic and wood products are sometimes destroyed by human beings in public places. This is not a matter of material quality, it is a matter of human thought. If we pay attention to it and take it seriously, it can be completely avoided. It can be said that it is a human factor.

3. The phenomenon of inferior fittings:

The bottom cover of the wooden-plastic barrier column is mostly purchased by the manufacturer. The product quality is poor, the appearance is poor, it is not strong, fragile, high cost and difficult to replace. It is really not suitable for the base cover. It is suggested that wood-plastic plate splicing be used instead of wood-plastic plate splicing. In addition, when splicing the upper and lower crossbars and inclined gears of the guardrail, the joint tenons should not be too small, otherwise they are very unstable and vulnerable to human destruction. In addition, the steel lining part of the column base should be as high as possible to increase the firmness of the column.