Method Of Plastic Wood Flooring Device And Notices For Its Device

I. Installation Method of Plastic Wood Flooring

Top of the list, in front of plastic wood flooring device

1. From the professional point of view of the installation floor, before starting the operation of the plastic-wood floor specifications, we must adhere to the outstanding situation of the dryness, flatness and cleanliness of the plastic-wood floor, so as to ensure the smooth operation of the follow-up device very well.

2. Preparing the electric drill, carpenter's things, labor gloves, stainless steel screw and so on. In the meantime, the choice drill for electric decoration wood floor is the necessary thing for the installation of plastic wood floor. Plastic wood flooring is brittle. When fixing flooring and keel, it is necessary to use electric drill to lead holes and then install screw to fix them, so as to prevent damage to plastic wood flooring.

II. Process of Plastic Flooring Devices

1. Fixed Plastic-wood keel: placing Plastic-wood keel evenly on the cement floor, advocating that each uplift distance is 30 cm. Drill holes on keel with electric drill. The diameter of the hole should not be less than the diameter of the screw. Then screw the screw into the hole drilled and fix the keel on the cement floor. The head of the nail should be all screwed into the keel and not exposed. Otherwise, it may lead to uneven floor layout.

2. Fixed the first floor in the list: There are Yin and Yang grooves on both sides of the layout of each plastic wood floor. When paving the first floor of the list, you can use carpenter's things to cut off or grind the sungroove on the outside of the first floor, and then use electric drill to lead holes in the surface of the floor, open and rotate the nails, and fix them on the keel.

3. Fixed the second floor: clamp the positive groove of the second Plastic-wood floor to the position of the negative groove of the first floor on the list, then drill the lead hole on the outer surface of the positive groove of the second floor, screw in the screw and fix it on the keel. The distance of the screw can be controlled by the constructors themselves in the process of the installation, so it does not need to be too densely distributed, so as to ensure that it is firm. Then the plastic-wood flooring device on the surface is the same as that on the front, so there is no need to explain more.