Installation Clearance Of Plastic Wood Floor

1. Installation clearance of the floor

1. Because plastic wood has the characteristics of slight thermal expansion and contraction, and considering cleaning and other reasons, when installing the plastic wood profile, there must be a proper gap between the edges and the ends. The reservation of this gap is also closely related to the climate and temperature during construction.

2. It is best to install the profile on the keel when installing the plastic wood floor. According to the thickness of the profile (20MM-40MM), the distance between the keels is generally between 400MM-600MM.

3. When there is an inclination between the profile installation and the keel, or if it is installed in the bath, please reduce the distance between the keel at least 10 cm.

2. Installation clearance of railings and pillars

1. The characteristics of thermal expansion and contraction of plastic wood should also be considered when mortise joints, and it should also have room for expansion and contraction.

2. When installing the column and the road ground, steel plates can be embedded in the concrete, and the steel plate at the bottom of the column can be welded with the embedded steel plate or fastened with bolts.

3. When the total length of the railing is greater than 300 meters, consider building a deformed transitional column.

4. The style of the railing, the specifications of the selected profile and the span of the railing are closely related.