What Problems Should Be Paid Attention To When Installing Plastic Wood Materials

With the continuous improvement of people's living standards, plastic wood materials are used more and more in outdoor decoration, becoming the best material to replace anti-corrosion wood. Due to its waterproof and anti-corrosion characteristics, it is mainly used for outdoor platforms, such as outdoor floors. , guardrail, etc. So, what should you pay attention to when installing plastic wood flooring?

1. Due to the high density of the plastic-wood material itself, a drill must be used to guide the hole where the self-tapping screw is used, and then the self-tapping screw is tightened.

2. Requirement for fixed keel: the installation work surface is required to be flat, without potholes, and the distance between the keels is 300mm~350mm.

3. For the paving of a large-area wood-plastic floor, it is recommended to use the installation method shown in the figure, and the length of each wood-plastic floor shall not exceed 2 meters.

4. Edge banding treatment

5. For the paving of curved plastic wood flooring, it is necessary to cut the two ends of each plastic wood floor according to the length and angle of the curve before paving.

6. For the pavement of wood-plastic floor of steps, it is recommended to use metal beading to protect the external corners of the steps.

7. Please avoid heavy objects' impact or collision during use. During the storage, transportation, and installation of the material, please handle it properly to prevent it from being damaged by falling from a height.